'Bargass 6' 8.8M High Speed Landing Craft
The team at Sea Speed are proud to announce the completion of our latest new 8.8metre Landing Craft ‘Kalibobo Diver’. She is our latest version of this high-speed aluminium landing craft design, which was built by the SeaCat Ships team in Thailand, See Video
The award-winning design of this heavy duty, aluminium plate barge
model is approved by the Australian commercial vessel standards, NSCV Class 1D
for a passenger vessel. . This landing craft design is a customer favorite due to its
versatility, stability.
She is the sixth version of this design and sold to a good customer in PNG. This latest stylized versions with a 6mm plate shell and have the capacity to hold either 30 passengers on side fold-down seating, 2.5 tonne of cargo or a medium sized pick up truck. She is powered by twin 200 h.p. Suzuki 4 Stroke Outboard engines, giving a fully loaded top speed of 33 knots and top speed light load of over 35 Knots.
Immediate delivery is possible by road or by sea, as well as the option to disassembled the vessel to fit into a 40 foot container for shipping to any port in the world.
Standard Specifications
Hull Dimensions
Length (overall) 8.80M Metres
Length (waterline) 7.46M Metres (NSCV)
Beam 3.50 Metres
Depth 1.43 Metres
Draft 400 MM (loaded)
Powering
Engines: 2 of Suzuki 4 stroke outboard (200h.p.)
25” long shaft with Tacho, key start and standard instruments.
Speed
Lightship speed (approx) 35 knots
Loaded speed (approx) 28 knots (typical load 2.5 tonne)
Loiter speed (approx) 8 knots
Tank Capacities
Fuel (Seperate) 2 of 200 ltr
Class
The vessels are constructed and fitted out in accordance with the requirements of the NSCV code rules for an aluminium passenger vessel and good boat building practice (No Survey Certificate).
Structural Scantlings
Hull bottom plate 6 mm plate
Hull side plate 6 mm plate
Deckhouse plate 4 mm plate
Deck plate 4 mm plate
Layout
All hull and deckhouse structure shall be of marine grade aluminium.
Canopy: Fabricated aluminium tube canopy with fabric (sumbrella) cover
Console:Fabricated aluminium console (buffed aluminium) with electronic’s, battery gauges, dc switchboard, and compass fitted above with room for the engine instruments. Electrical switching and controls under.
Bow Door:Fabricated aluminium heavy duty door with four hinge points and rubber seals with watertight retainer. Warne Vantage 2000 winch with 6 mm wire rope starboard side and stainless steel locking devise port.
Deck Coverings
Non Skid painted
Internal Bulkhead Linings
Bulwarks below windows buffed aluminium.
Deck Head Finish
Main cabin Aluminium tube with Sumbrella.
Hatches
Inspection hatches to be provided of watertight standard to all compartments. These shall be 25mm plate machined pieces with tapped holes for ease in removal.
Ground Gear
Ground gear: 1 X 15 KG SHHP Anchor with 3 Metres of 8mm short link chain and 58 Metres of 10mm Nylon Rope. Mooring Gear: 3 x Inflatable Fenders fitted with 16mm ropes, 3 of 16mm Mooring Ropes.
Fendering
Fendering: heavy duty aluminium tube to gunnel (buffed aluminium) pipe to be fitted around the perimeter at the hull plus main deck height.
Paint System
Paint system: To be coated with (Jotun) two pack anti-fouling system.
Hull topsides: Painted (Blue).
Console: Painted (White).
Decks: Exterior decks to be coated with Jotan non skid paint to the manufacturer’s specifications.
Interiors: Exposed structure buffed Aluminium with Nycoat,
Vessel's name and insignia shall be applied to the port and starboard and also on the transom with the port of registry.
Draft marks shall to be painted on bow and stern. The vessel’s number shall be center punched on the hull in way of a bulkhead.
Antifowl shall to be Jotun type.
Bollards
Bollards: Six of fabricated aluminium bollards to be provided suitably arranged to enable safe berthing.
Passenger Seating
Seating arrangement shall be in accordance with the general arrangement plan. Helm Seat to be fabricated aluminium with cushions (Sumbrella type) Exterior seating to be aluminium bench seat style (folding with legs and clips) with Marine Carpet cover.
Helm & Electronic Equipment
Electronics (Helm) 1 x Garman 4G, Radar, 1 x ICOM IC-M304 VHF Marine Radio with Banten Antenna, 1 x Ritchie 76mm Compass. The helm console shall include all engine instrumentation. Eg: voltmeter, tachometer, oil and temperature gauges,etc.
Safety Equipment List
30 x Coastal Life Jackets
1 x dry chemical fire extinguisher (5.5 Ltr)
1 x Portable horn
Pyros’ (3 x parachute, 2 red/1 orange hand held) in box
1 x First Aid Kit
1 x Life buoy with light
1 fire bucket
2 x torch
1 x boat hook
Bilge Pumping Arrangement
Bilge pumping system: arrangement shall be in accordance with the NSCV code requirements. Bilge Arrangement 2 x Manual Bilge Pumps (Whale Gusher, double acting) fitted with flexible hoses, 6 x Voids, each void contains a spin-out inspection port and fixed bilge suction/sounding with cam lock fittings.
Fuel System
Fuel tanks: two (2) of 200 ltr seperate fuel tanks to be installed above deck. The tanks shall be fully welded marine grade aluminium with aluminium fittings. (Filler pipe, inspection manhole ports, vents, etc). Fuel oil filter assembly or equivalent shall be provided.
Steering System
Steering and Control System: Throttle and Trim controls, Sea Star steering system including talon wheel and fuel system.
Batteries
Batteries: Three (3) of 12volt 200ah lead acid batteries are to be supplied. Two (2) for main engines plus house bank plus one (1) of 12 volt 100ah for winch battery. The batteries are to be secured in acid proof boxes. All boxes are to be properly vented. All battery leads shall be 20 rubber insulated welding cable with disconnect switches. The start lead cables shall be run as direct as possible.
Electrical System
All cables shall be in accordance with the requirements of the Australian Standard.
The system supplied and extent of wiring shall be as listed below.
Vessel completely wired with marine grade wire and fittings, 3 x 200 AH batteries fitted in battery boxes enclosed in aluminium compartments with DC Switch Board, breakers and switches, All round white navigation Light, 1 x Spotlight, 5 x downlights.
Switches and circuit breakers shall be compatible with the circuit loading specified and approved by the electrician. Suitable cathodic hull protection devices shall be used as required.The main switching is at the helm console.
Sea Speed Pty Ltd. P.O. BOX 773 Aspley 4034, Brisbane Australia
Phone Int 668
04406355
Contact InformationSea Speed Pty Ltd. P.O. BOX 773 Aspley 4034, Brisbane Australia Phone +61 7 3862 9988 Fax +61 7 3862 9488 Mobile Paul 0417 770 769 Email SeaSpeedDesignCopyright © 2005 -2008 Sea Speed Pty Ltd |